SUDZ-IT EV Utility Nozzle

**NEW** The patent-pending SUDZ-IT EV Utility nozzle is the first of its kind, designed specifically for Electric Vehicle fires, yet serves many applications including as a decon nozzle. Includes 2×3 foot extension pipes to protect the firefighters setting it in place.

Overview:

  • The patent-pending SUDZ-IT EV Utility nozzle is the first of its kind, designed specifically for Electric Vehicle fires, yet serves many applications.
  • The spray pattern has been engineered to cover a space of 8 ft by 16 ft at 8 inches high, yet still allows a spray pattern covering 128 Square feet
  • Comes standard with 2×3 foot extension pipes fitted with a curtain nozzle to help protect the firefighters setting it in place

 

Description: 

The SUDZ-IT EV Utility Nozzle allows for water to be sprayed in the tightest of spaces. This low-profile nozzle sprays an even coverage of water under an electric vehicle which gives you less than 8 inches of clearance. It distributes the water evenly and exactly, where it is most effective to cool the most vulnerable and inaccessible part of the vehicle, the battery pack. Using the SUDZ-IT Utility Nozzle makes every precious drop of water count, and do its job… to Cool and Extinguish.

The SUDZ-IT Utility Nozzle incorporates a set of skids, attached to the nozzle, to make placement easier and comes standard with 2 x 3- foot extension pipes fitted with a curtain nozzle, to help protect the firefighters setting it in place. Once in place, the nozzles allow Firefighters to operate at a safe distance.

 

The SUDZ-IT Utility Nozzle can be used in the following applications:
  • Electric Vehicle fires
  • Scooter battery fires
  • Traditional engine fires
  • Pallet fires
  • Cooling LP tanks
  • Decon nozzle
  • Decon shower head
  • Overhauling furniture
  • Wetting a fire break
  • Overhauling tight areas

 

Specifications:
SUDZ-IT Utility Nozzle:
  • 12″ Long x 9″ Wide x 2 ½” High, -Weight 4 Pounds
  • EV nozzle flow is adjustable from 60 GPM up to 150 GPM at 100 PSI. (at the time of Manufacture)
  • The factory base flow is 60 GPM at the nozzle.
Extension Tubes (see diagram)
  • 1 x 40″ Long x 8″ Wide (at the skid) x 6″ high (at the fan nozzle); Weight 6 Pounds.
  • 1 x 40″ long x 1.5″ wide x 1.5″ High; Weight 4 pounds

 

Additional Information:

You may also like…